ntv2fieldburn.cpp

Go to the documentation of this file.

/* SPDX-License-Identifier: MIT */
#include "ntv2fieldburn.h"
#include "ntv2devicescanner.h"
#include "ajabase/common/types.h"
#include "ajabase/system/process.h"
#include "ajabase/system/systemtime.h"
#include <iostream>
 
using namespace std;
 
#define ToCharPtr(_p_)  reinterpret_cast<char*>(_p_)
 
static const uint32_t   kAppSignature   (NTV2_FOURCC('F','l','d','B'));
 
 
 
 
NTV2FieldBurn::NTV2FieldBurn (const BurnConfig & inConfig)
    :   mConfig             (inConfig),
        mPlayThread         (AJAThread()),
        mCaptureThread      (AJAThread()),
        mDeviceID           (DEVICE_ID_NOTFOUND),
        mVideoFormat        (NTV2_FORMAT_UNKNOWN),
        mSavedTaskMode      (NTV2_DISABLE_TASKS),
        mOutputDest         (NTV2_OUTPUTDESTINATION_INVALID),
        mAudioSystem        (inConfig.WithAudio() ? NTV2_AUDIOSYSTEM_1 : NTV2_AUDIOSYSTEM_INVALID),
        mGlobalQuit         (false)
{
}   //  constructor
 
 
NTV2FieldBurn::~NTV2FieldBurn ()
{
    Quit(); //  Stop my capture and playout threads, then destroy them
    mDevice.UnsubscribeInputVerticalEvent(mConfig.fInputChannel);   //  Unsubscribe from input VBI event
}   //  destructor
 
 
void NTV2FieldBurn::Quit (void)
{
    //  Set the global 'quit' flag, and wait for the threads to go inactive...
    mGlobalQuit = true;
 
    while (mPlayThread.Active())
        AJATime::Sleep(10);
 
    while (mCaptureThread.Active())
        AJATime::Sleep(10);
 
    if (!mConfig.fDoMultiFormat)
    {   //  Release the device...
        mDevice.ReleaseStreamForApplication (kAppSignature, int32_t(AJAProcess::GetPid()));
        if (NTV2_IS_VALID_TASK_MODE(mSavedTaskMode))
            mDevice.SetEveryFrameServices(mSavedTaskMode);  //  Restore prior task mode
    }
}   //  Quit
 
 
AJAStatus NTV2FieldBurn::Init (void)
{
    AJAStatus status (AJA_STATUS_SUCCESS);
 
    //  Open the device...
    if (!CNTV2DeviceScanner::GetFirstDeviceFromArgument (mConfig.fDeviceSpec, mDevice))
        {cerr << "## ERROR:  Device '" << mConfig.fDeviceSpec << "' not found" << endl;  return AJA_STATUS_OPEN;}
 
    if (!mDevice.IsDeviceReady (false))
        {cerr << "## ERROR:  Device '" << mConfig.fDeviceSpec << "' not ready" << endl;  return AJA_STATUS_INITIALIZE;}
 
    mDeviceID = mDevice.GetDeviceID();  //  Keep the device ID handy since it will be used frequently
    if (!mDevice.features().CanDoCapture())
        {cerr << "## ERROR:  Device '" << mDeviceID << "' cannot capture" << endl;  return AJA_STATUS_FEATURE;}
    if (!mDevice.features().CanDoPlayback())
        {cerr << "## ERROR:  Device '" << mDeviceID << "' cannot playout" << endl;  return AJA_STATUS_FEATURE;}
 
    ULWord  appSignature    (0);
    int32_t appPID          (0);
    mDevice.GetStreamingApplication (appSignature, appPID); //  Who currently "owns" the device?
    mDevice.GetEveryFrameServices(mSavedTaskMode);          //  Save the current device state
    if (!mConfig.fDoMultiFormat)
    {
        if (!mDevice.AcquireStreamForApplication (kAppSignature, int32_t(AJAProcess::GetPid())))
        {
            cerr << "## ERROR:  Unable to acquire device because another app (pid " << appPID << ") owns it" << endl;
            return AJA_STATUS_BUSY;     //  Some other app is using the device
        }
        mDevice.ClearRouting(); //  Clear the current device routing (since I "own" the device)
    }
    mDevice.SetEveryFrameServices(NTV2_OEM_TASKS);  //  Force OEM tasks
 
    //  Set up the video and audio...
    status = SetupVideo();
    if (AJA_FAILURE(status))
        return status;
 
    if (NTV2_IS_VALID_AUDIO_SYSTEM(mAudioSystem))
        status = SetupAudio();
    if (AJA_FAILURE(status))
        return status;
 
    //  Set up the circular buffers...
    status = SetupHostBuffers();
    if (AJA_FAILURE(status))
        return status;
 
    //  Set up the signal routing...
    RouteInputSignal();
    RouteOutputSignal();
 
    //  Lastly, prepare my AJATimeCodeBurn instance...
    mTCBurner.RenderTimeCodeFont (CNTV2DemoCommon::GetAJAPixelFormat (mConfig.fPixelFormat),
                                                                        mFormatDesc.numPixels,
                                                                        mFormatDesc.numLines);
    //  Ready to go...
    #if defined(_DEBUG)
        cerr << mConfig << endl;
    #endif  //  not _DEBUG
    BURNINFO("Configuration: " << mConfig);
    return AJA_STATUS_SUCCESS;
 
}   //  Init
 
 
AJAStatus NTV2FieldBurn::SetupVideo (void)
{
    const UWord numFrameStores  (mDevice.features().GetNumFrameStores());
 
    //  Does this device have the requested input source?
    if (!mDevice.features().CanDoInputSource(mConfig.fInputSource))
        {cerr << "## ERROR:  Device does not have the specified input source" << endl;  return AJA_STATUS_BAD_PARAM;}
 
    //  Pick an input NTV2Channel from the input source, and enable its frame buffer...
    mConfig.fInputChannel = NTV2_INPUT_SOURCE_IS_SDI(mConfig.fInputSource) ? ::NTV2InputSourceToChannel(mConfig.fInputSource) : NTV2_CHANNEL1;
    mDevice.EnableChannel(mConfig.fInputChannel);       //  Enable the input frame buffer
 
    //  Pick an appropriate output NTV2Channel, and enable its frame buffer...
    switch (mConfig.fInputSource)
    {
        case NTV2_INPUTSOURCE_SDI1:     mConfig.fOutputChannel = (numFrameStores == 2 || numFrameStores > 4) ? NTV2_CHANNEL2 : NTV2_CHANNEL3;
                                        break;
 
        case NTV2_INPUTSOURCE_SDI2:     mConfig.fOutputChannel = (numFrameStores > 4) ? NTV2_CHANNEL3 : NTV2_CHANNEL4;
                                        break;
 
        case NTV2_INPUTSOURCE_SDI3:     mConfig.fOutputChannel = NTV2_CHANNEL4;
                                        break;
 
        case NTV2_INPUTSOURCE_SDI4:     mConfig.fOutputChannel = (numFrameStores > 4) ? NTV2_CHANNEL5 : NTV2_CHANNEL3;
                                        break;
 
        case NTV2_INPUTSOURCE_SDI5:     mConfig.fOutputChannel = NTV2_CHANNEL6;     break;
        case NTV2_INPUTSOURCE_SDI6:     mConfig.fOutputChannel = NTV2_CHANNEL7;     break;
        case NTV2_INPUTSOURCE_SDI7:     mConfig.fOutputChannel = NTV2_CHANNEL8;     break;
        case NTV2_INPUTSOURCE_SDI8:     mConfig.fOutputChannel = NTV2_CHANNEL7;     break;
 
        case NTV2_INPUTSOURCE_ANALOG1:
        case NTV2_INPUTSOURCE_HDMI1:    mConfig.fOutputChannel = numFrameStores < 3 ? NTV2_CHANNEL2 : NTV2_CHANNEL3;
                                        break;
        default:
        case NTV2_INPUTSOURCE_INVALID:  cerr << "## ERROR:  Bad input source" << endl;  return AJA_STATUS_BAD_PARAM;
    }
    mDevice.EnableChannel(mConfig.fOutputChannel);  //  Enable the output frame buffer
 
    //  Enable/subscribe interrupts...
    mDevice.EnableInputInterrupt(mConfig.fInputChannel);
    mDevice.SubscribeInputVerticalEvent(mConfig.fInputChannel);
    mDevice.EnableOutputInterrupt(mConfig.fOutputChannel);
    mDevice.SubscribeOutputVerticalEvent(mConfig.fOutputChannel);
 
    //  Pick an appropriate output spigot based on the output channel...
    mOutputDest = ::NTV2ChannelToOutputDestination(mConfig.fOutputChannel);
    if (!mDevice.features().CanDoWidget(NTV2_Wgt12GSDIOut2)
        && !mDevice.features().CanDoWidget(NTV2_Wgt3GSDIOut2)
            && !mDevice.features().CanDoWidget(NTV2_WgtSDIOut2))
                mOutputDest = NTV2_OUTPUTDESTINATION_SDI1;                  //  If device has only one SDI output
    if (mDevice.features().HasBiDirectionalSDI()                            //  If device has bidirectional SDI connectors...
        && NTV2_OUTPUT_DEST_IS_SDI(mOutputDest))                            //  ...and output destination is SDI...
            mDevice.SetSDITransmitEnable (mConfig.fOutputChannel, true);    //  ...then enable transmit mode
 
    //  Flip the input spigot to "receive" if necessary...
    bool isXmit (false);
    if (mDevice.features().HasBiDirectionalSDI()                            //  If device has bidirectional SDI connectors...
        && NTV2_INPUT_SOURCE_IS_SDI(mConfig.fInputSource)                   //  ...and desired input source is SDI...
        && mDevice.GetSDITransmitEnable (mConfig.fInputChannel, isXmit)     //  ...and GetSDITransmitEnable succeeds...
        && isXmit)                                                          //  ...and input is set to "transmit"...
        {
            mDevice.SetSDITransmitEnable (mConfig.fInputChannel, false);            //  ...then disable transmit mode...
            mDevice.WaitForOutputVerticalInterrupt (mConfig.fOutputChannel, 10);    //  ...and allow device to lock to input signal
        }   //  if input SDI connector needs to switch from transmit mode
 
    //  Is there an input signal?  What format is it?
    mVideoFormat = mDevice.GetInputVideoFormat(mConfig.fInputSource);
    if (mVideoFormat == NTV2_FORMAT_UNKNOWN)
        {cerr << "## ERROR:  No input signal, or can't handle its format" << endl;  return AJA_STATUS_NOINPUT;}
 
    //  This demo requires an interlaced signal...
    if (IsProgressiveTransport(mVideoFormat))
        {cerr << "## ERROR:  Input signal is progressive -- no fields" << endl;  return AJA_STATUS_UNSUPPORTED;}
 
    //  Free-run the device clock, since E-to-E mode isn't used, nor is a mixer tied to the input...
    mDevice.SetReference(NTV2_REFERENCE_FREERUN);
 
    //  Check the timecode source...
    if (!InputSignalHasTimecode())
        cerr << "## WARNING:  Timecode source '" << ::NTV2TCIndexToString(mConfig.fTimecodeSource, true) << "' has no embedded timecode" << endl;
 
    //  If the device supports different per-channel video formats, configure it as requested...
    if (mDevice.features().CanDoMultiFormat())
        mDevice.SetMultiFormatMode (mConfig.fDoMultiFormat);
 
    //  Set the input/output channel video formats to the video format that was detected earlier...
    mDevice.SetVideoFormat (mVideoFormat, false, false, mDevice.features().CanDoMultiFormat() ? mConfig.fInputChannel : NTV2_CHANNEL1);
    if (mDevice.features().CanDoMultiFormat())                                          //  If device supports multiple formats per-channel...
        mDevice.SetVideoFormat (mVideoFormat, false, false, mConfig.fOutputChannel);    //  ...then also set the output channel format to the detected input format
 
    //  Can the device handle the requested frame buffer pixel format?
    if (!mDevice.features().CanDoFrameBufferFormat(mConfig.fPixelFormat))
        {cerr << "## ERROR: " << ::NTV2FrameBufferFormatToString(mConfig.fPixelFormat) << " unsupported" << endl;  return AJA_STATUS_UNSUPPORTED;}
 
    //  Set both input and output frame buffers' pixel formats...
    mDevice.SetFrameBufferFormat (mConfig.fInputChannel, mConfig.fPixelFormat);
    mDevice.SetFrameBufferFormat (mConfig.fOutputChannel, mConfig.fPixelFormat);
 
    //  Normally, timecode embedded in the output signal comes from whatever is written into the RP188
    //  registers (30/31 for SDI out 1, 65/66 for SDIout2, etc.).
    //  AutoCirculate automatically writes the timecode in the AUTOCIRCULATE_TRANSFER's acRP188 field
    //  into these registers (if AutoCirculateInitForOutput was called with AUTOCIRCULATE_WITH_RP188 set).
    //  Newer AJA devices can also bypass these RP188 registers, and simply copy whatever timecode appears
    //  at any SDI input (called the "bypass source"). To ensure that AutoCirculate's playout timecode
    //  will actually be seen in the output signal, "bypass mode" must be disabled...
    bool    bypassIsEnabled (false);
    mDevice.IsRP188BypassEnabled (::NTV2InputSourceToChannel(mConfig.fInputSource), bypassIsEnabled);
    if (bypassIsEnabled)
        mDevice.DisableRP188Bypass(::NTV2InputSourceToChannel(mConfig.fInputSource));
 
    //  Now that newer AJA devices can capture/play anc data from separate buffers,
    //  there's no need to enable VANC frame geometries...
    mDevice.SetVANCMode (NTV2_VANCMODE_OFF, mConfig.fInputChannel);
    mDevice.SetVANCMode (NTV2_VANCMODE_OFF, mConfig.fOutputChannel);
    if (::Is8BitFrameBufferFormat (mConfig.fPixelFormat))
    {   //  8-bit FBFs:  since not using VANC geometries, disable bit shift...
        mDevice.SetVANCShiftMode (mConfig.fInputChannel, NTV2_VANCDATA_NORMAL);
        mDevice.SetVANCShiftMode (mConfig.fOutputChannel, NTV2_VANCDATA_NORMAL);
    }
 
    //  Now that the video is set up, get information about the current frame geometry...
    mFormatDesc = NTV2FormatDescriptor (mVideoFormat, mConfig.fPixelFormat);
    if (mFormatDesc.IsPlanar())
        {cerr << "## ERROR: This demo doesn't work with planar pixel formats" << endl;  return AJA_STATUS_UNSUPPORTED;}
    return AJA_STATUS_SUCCESS;
 
}   //  SetupVideo
 
 
AJAStatus NTV2FieldBurn::SetupAudio (void)
{
    if (!NTV2_IS_VALID_AUDIO_SYSTEM (mAudioSystem))
        return AJA_STATUS_SUCCESS;
 
    if (mConfig.fDoMultiFormat)
        if (mDevice.features().GetNumAudioSystems() > 1)
            if (UWord(mConfig.fInputChannel) < mDevice.features().GetNumAudioSystems())
                mAudioSystem = ::NTV2ChannelToAudioSystem(mConfig.fInputChannel);
 
    //  Have the audio subsystem capture audio from the designated input source...
    mDevice.SetAudioSystemInputSource (mAudioSystem, ::NTV2InputSourceToAudioSource(mConfig.fInputSource),
                                        ::NTV2InputSourceToEmbeddedAudioInput(mConfig.fInputSource));
 
    //  It's best to use all available audio channels...
    mDevice.SetNumberAudioChannels (mDevice.features().GetMaxAudioChannels(), mAudioSystem);
 
    //  Assume 48kHz PCM...
    mDevice.SetAudioRate (NTV2_AUDIO_48K, mAudioSystem);
 
    //  4MB device audio buffers work best...
    mDevice.SetAudioBufferSize (NTV2_AUDIO_BUFFER_BIG, mAudioSystem);
 
    //  Set up the output audio embedders...
    if (mDevice.features().GetNumAudioSystems() > 1)
    {
        //  Some devices, like the Kona1, have 2 FrameStores but only 1 SDI output,
        //  which makes mConfig.fOutputChannel == NTV2_CHANNEL2, but need SDIoutput to be NTV2_CHANNEL1...
        UWord   SDIoutput(mConfig.fOutputChannel);
        if (SDIoutput >= mDevice.features().GetNumVideoOutputs())
            SDIoutput = mDevice.features().GetNumVideoOutputs() - 1;
        mDevice.SetSDIOutputAudioSystem (NTV2Channel(SDIoutput), mAudioSystem);
    }
 
    //
    //  Loopback mode plays whatever audio appears in the input signal when it's
    //  connected directly to an output (i.e., "end-to-end" mode). If loopback is
    //  left enabled, the video will lag the audio as video frames get briefly delayed
    //  in our ring buffer. Audio, therefore, needs to come out of the (buffered) frame
    //  data being played, so loopback must be turned off...
    //
    mDevice.SetAudioLoopBack (NTV2_AUDIO_LOOPBACK_OFF, mAudioSystem);
    return AJA_STATUS_SUCCESS;
 
}   //  SetupAudio
 
 
AJAStatus NTV2FieldBurn::SetupHostBuffers (void)
{
    ULWordSequence failures;
    CNTV2DemoCommon::SetDefaultPageSize();  //  Set host-specific page size
 
    //  Let my circular buffer know when it's time to quit...
    mFrameDataRing.SetAbortFlag(&mGlobalQuit);
 
    //  Make the video buffers half the size of a full frame (i.e. field-size)...
    const ULWord vidBuffSizeBytes (mFormatDesc.GetTotalBytes() / 2);
    NTV2_ASSERT(mFormatDesc.GetBytesPerRow() ==  mFormatDesc.linePitch * 4);
 
    //  Allocate and add each in-host NTV2FrameData to my circular buffer member variable...
    mHostBuffers.reserve(CIRCULAR_BUFFER_SIZE);
    while (mHostBuffers.size() < CIRCULAR_BUFFER_SIZE)
    {
        mHostBuffers.push_back(NTV2FrameData());            //  Make a new NTV2FrameData...
        NTV2FrameData & frameData (mHostBuffers.back());    //  ...and get a reference to it
 
        //  In Field Mode, one buffer is used to hold each field's video data.
        frameData.fVideoBuffer.Allocate (vidBuffSizeBytes, /*pageAligned*/true);
        if (!mConfig.FieldMode())
        {   //  In Frame Mode, use two buffers, one for each field.  The DMA transfer
            //  of each field will be done as a group of lines, with each line considered a "segment".
            frameData.fVideoBuffer2.Allocate (vidBuffSizeBytes, /*pageAligned*/true);
        }
 
        //  Allocate a page-aligned audio buffer (if handling audio)...
        if (NTV2_IS_VALID_AUDIO_SYSTEM(mAudioSystem))
            frameData.fAudioBuffer.Allocate (NTV2_AUDIOSIZE_MAX, /*pageAligned*/true);
        if (frameData.AudioBuffer())
            frameData.fAudioBuffer.Fill(ULWord(0));
 
        //  Check for memory allocation failures...
        if (!frameData.VideoBuffer()
            || (NTV2_IS_VALID_AUDIO_SYSTEM(mAudioSystem) && !frameData.AudioBuffer())
            || (!frameData.VideoBuffer2() && !mConfig.FieldMode()))
                failures.push_back(ULWord(mHostBuffers.size()+1));
 
        //  Add this NTV2FrameData to the ring...
        mFrameDataRing.Add (&frameData);
    }   //  for each NTV2FrameData
 
    if (!failures.empty())
    {
        cerr << "## ERROR: " << DEC(failures.size()) << " allocation failures in buffer(s): " << failures << endl;
        return AJA_STATUS_MEMORY;
    }
    return AJA_STATUS_SUCCESS;
 
}   //  SetupHostBuffers
 
 
void NTV2FieldBurn::RouteInputSignal (void)
{
    const NTV2OutputCrosspointID    inputOutputXpt  (::GetInputSourceOutputXpt (mConfig.fInputSource));
    const NTV2InputCrosspointID     fbInputXpt      (::GetFrameBufferInputXptFromChannel (mConfig.fInputChannel));
    const bool                      isRGB           (::IsRGBFormat(mConfig.fPixelFormat));
 
    if (isRGB)
    {
        //  If the frame buffer is configured for RGB pixel format, incoming YUV must be converted.
        //  This routes the video signal from the input through a color space converter before
        //  connecting to the RGB frame buffer...
        const NTV2InputCrosspointID     cscVideoInputXpt    (::GetCSCInputXptFromChannel (mConfig.fInputChannel));
        const NTV2OutputCrosspointID    cscOutputXpt        (::GetCSCOutputXptFromChannel (mConfig.fInputChannel, false/*isKey*/, true/*isRGB*/));
 
        mDevice.Connect (cscVideoInputXpt, inputOutputXpt); //  Connect the CSC's video input to the input spigot's output
        mDevice.Connect (fbInputXpt, cscOutputXpt);         //  Connect the frame store's input to the CSC's output
    }
    else
        mDevice.Connect (fbInputXpt, inputOutputXpt);       //  Route the YCbCr signal directly from the input to the frame buffer's input
 
}   //  RouteInputSignal
 
 
void NTV2FieldBurn::RouteOutputSignal (void)
{
    const NTV2InputCrosspointID     outputInputXpt  (::GetOutputDestInputXpt (mOutputDest));
    const NTV2OutputCrosspointID    fbOutputXpt     (::GetFrameBufferOutputXptFromChannel (mConfig.fOutputChannel, ::IsRGBFormat (mConfig.fPixelFormat)));
    const bool                      isRGB           (::IsRGBFormat(mConfig.fPixelFormat));
    NTV2OutputCrosspointID          outputXpt       (fbOutputXpt);
 
    if (isRGB)
    {
        const NTV2OutputCrosspointID    cscVidOutputXpt (::GetCSCOutputXptFromChannel (mConfig.fOutputChannel, false, true));
        const NTV2InputCrosspointID     cscVidInputXpt  (::GetCSCInputXptFromChannel (mConfig.fOutputChannel));
 
        mDevice.Connect (cscVidInputXpt, fbOutputXpt);      //  Connect the CSC's video input to the frame store's output
        mDevice.Connect (outputInputXpt, cscVidOutputXpt);  //  Connect the SDI output's input to the CSC's video output
        outputXpt = cscVidOutputXpt;
    }
    else
        mDevice.Connect (outputInputXpt, outputXpt);
 
    mTCOutputs.clear();
    mTCOutputs.push_back(mConfig.fOutputChannel);
 
    if (!mConfig.fDoMultiFormat)
    {
        //  Route all SDI outputs to the outputXpt...
        const NTV2Channel   startNum        (NTV2_CHANNEL1);
        const NTV2Channel   endNum          (NTV2Channel(mDevice.features().GetNumVideoChannels()));
        NTV2WidgetID        outputWidgetID  (NTV2_WIDGET_INVALID);
 
        for (NTV2Channel chan(startNum);  chan < endNum;  chan = NTV2Channel(chan+1))
        {
            if (chan == mConfig.fInputChannel  ||  chan == mConfig.fOutputChannel)
                continue;   //  Skip the input & output channel, already routed
            if (mDevice.features().HasBiDirectionalSDI())
                mDevice.SetSDITransmitEnable (chan, true);
            if (CNTV2SignalRouter::GetWidgetForInput (::GetSDIOutputInputXpt (chan, mDevice.features().CanDoDualLink()), outputWidgetID))
                if (mDevice.features().CanDoWidget(outputWidgetID))
                {
                    mDevice.Connect (::GetSDIOutputInputXpt(chan), outputXpt);
                    mTCOutputs.push_back(chan);
                }
        }   //  for each output spigot
 
        //  If HDMI and/or analog video outputs are available, route them, too...
        if (mDevice.features().CanDoWidget(NTV2_WgtHDMIOut1))
            mDevice.Connect (NTV2_XptHDMIOutInput, outputXpt);          //  Route output signal to HDMI output
        if (mDevice.features().CanDoWidget(NTV2_WgtHDMIOut1v2))
            mDevice.Connect (NTV2_XptHDMIOutQ1Input, outputXpt);        //  Route output signal to HDMI output
        if (mDevice.features().CanDoWidget(NTV2_WgtAnalogOut1))
            mDevice.Connect (NTV2_XptAnalogOutInput, outputXpt);        //  Route output signal to Analog output
        if (mDevice.features().CanDoWidget(NTV2_WgtSDIMonOut1))
        {   //  SDI Monitor output is spigot 4 (NTV2_CHANNEL5):
            mDevice.Connect (::GetSDIOutputInputXpt(NTV2_CHANNEL5), outputXpt); //  Route output signal to SDI monitor output
            mTCOutputs.push_back(NTV2_CHANNEL5);
        }
    }   //  if not multiChannel
    PLDBG(mTCOutputs.size() << " timecode destination(s):  " << ::NTV2ChannelListToStr(mTCOutputs));
 
}   //  RouteOutputSignal
 
 
AJAStatus NTV2FieldBurn::Run (void)
{
    //  Start the playout and capture threads...
    StartPlayThread();
    StartCaptureThread();
    return AJA_STATUS_SUCCESS;
 
}   //  Run
 
 
 
 
//  This is where we will start the play thread
void NTV2FieldBurn::StartPlayThread (void)
{
    //  Create and start the playout thread...
    mPlayThread.Attach(PlayThreadStatic, this);
    mPlayThread.SetPriority(AJA_ThreadPriority_High);
    mPlayThread.Start();
 
}   //  StartPlayThread
 
 
//  The playout thread function
void NTV2FieldBurn::PlayThreadStatic (AJAThread * pThread, void * pContext)     //  static
{   (void) pThread;
    //  Grab the NTV2FieldBurn instance pointer from the pContext parameter,
    //  then call its PlayFrames method...
    NTV2FieldBurn * pApp (reinterpret_cast<NTV2FieldBurn*>(pContext));
    pApp->PlayFrames();
 
}   //  PlayThreadStatic
 
 
void NTV2FieldBurn::PlayFrames (void)
{
    const ULWord            acOptions (AUTOCIRCULATE_WITH_RP188 | (mConfig.FieldMode() ? AUTOCIRCULATE_WITH_FIELDS : 0));
    ULWord                  goodXfers(0), badXfers(0), starves(0), noRoomWaits(0);
    AUTOCIRCULATE_TRANSFER  outputXferInfo;     //  F1 transfer info
    AUTOCIRCULATE_TRANSFER  outputXferInfo2;    //  F2 transfer info (unused in Field Mode)
    AUTOCIRCULATE_STATUS    outputStatus;
 
    //  Stop AutoCirculate on this channel, just in case some other app left it running...
    mDevice.AutoCirculateStop(mConfig.fOutputChannel);
    mDevice.WaitForOutputVerticalInterrupt(mConfig.fOutputChannel, 4);  //  Let it stop
    BURNNOTE("Thread started");
 
    if (!mConfig.FieldMode())
    {
        //  In Frame Mode, tell AutoCirculate to DMA F1's data as a group of "segments".
        //  Each segment is one line long, and the segments are contiguous in host
        //  memory, but are stored on every other line in the device frame buffer...
        outputXferInfo.EnableSegmentedDMAs (mFormatDesc.numLines / 2,       //  number of segments:  number of lines per field, i.e. half the line count
                                                mFormatDesc.linePitch * 4,  //  number of active bytes per line
                                                mFormatDesc.linePitch * 4,  //  host bytes per line:  normal line pitch when reading from our half-height buffer
                                                mFormatDesc.linePitch * 8); //  device bytes per line:  skip every other line when writing into device memory
 
        //  F2 is identical to F1, except that F2 starts on 2nd line in device frame buffer...
        outputXferInfo2.EnableSegmentedDMAs (mFormatDesc.numLines / 2,      //  number of segments:  number of lines per field, i.e. half the line count
                                                mFormatDesc.linePitch * 4,  //  number of active bytes per line
                                                mFormatDesc.linePitch * 4,  //  host bytes per line:  normal line pitch when reading from our half-height buffer
                                                mFormatDesc.linePitch * 8); //  device bytes per line:  skip every other line when writing into device memory
        outputXferInfo2.acInVideoDMAOffset  = mFormatDesc.linePitch * 4;    //  F2 starts on 2nd line in device buffer
    }
 
    //  Initialize AutoCirculate...
    if (!mDevice.AutoCirculateInitForOutput (mConfig.fOutputChannel, mConfig.fOutputFrames.count(), mAudioSystem, acOptions,
                                            1 /*numChannels*/,  mConfig.fOutputFrames.firstFrame(),  mConfig.fOutputFrames.lastFrame()))
        {PLFAIL("AutoCirculateInitForOutput failed");  mGlobalQuit = true;}
 
    while (!mGlobalQuit)
    {
        mDevice.AutoCirculateGetStatus (mConfig.fOutputChannel, outputStatus);
 
        //  Check if there's room for another frame on the card...
        if (outputStatus.CanAcceptMoreOutputFrames())
        {
            //  Device has at least one free frame buffer that can be filled.
            //  Wait for the next frame in our ring to become ready to "consume"...
            NTV2FrameData * pFrameData (mFrameDataRing.StartConsumeNextBuffer());
            if (!pFrameData)
                {starves++;  continue;} //  Producer thread isn't producing frames fast enough
 
            //  Prepare to transfer the timecode-burned field (F1) to the device for playout.
            //  Set the outputXfer struct's video and audio buffers from playData's buffers...
            //  IMPORTANT:  In Frame Mode, for segmented DMAs, AutoCirculateTransfer expects the video
            //              buffer size to be set to the segment size, in bytes, which is one raster line length.
            outputXferInfo.SetVideoBuffer (pFrameData->VideoBuffer(),
                                            mConfig.FieldMode() ? pFrameData->VideoBufferSize()     //  Field Mode
                                                                : mFormatDesc.GetBytesPerRow());    //  Frame Mode
            if (pFrameData->AudioBuffer())
                outputXferInfo.SetAudioBuffer (pFrameData->AudioBuffer(), pFrameData->AudioBufferSize());
            if (mConfig.FieldMode())
                outputXferInfo.acPeerToPeerFlags = pFrameData->fFrameFlags; //  Which field was this?
 
            //  Tell AutoCirculate to embed this frame's timecode into the SDI output(s)...
            outputXferInfo.SetOutputTimeCodes(pFrameData->fTimecodes);
            PLDBG(pFrameData->fTimecodes);
 
            //  Transfer field to the device...
            if (mDevice.AutoCirculateTransfer (mConfig.fOutputChannel, outputXferInfo))
                goodXfers++;
            else
                badXfers++;
 
            if (!mConfig.FieldMode())
            {   //  Frame Mode:  Additionally transfer F2 to the same device frame buffer used for F1.
                //  Again, for segmented DMAs, AutoCirculateTransfer expects the video buffer size to be
                //  set to the segment size, in bytes, which is one raster line length.
                outputXferInfo2.acDesiredFrame = outputXferInfo.acTransferStatus.acTransferFrame;
                outputXferInfo2.SetVideoBuffer (pFrameData->VideoBuffer2(), mFormatDesc.GetBytesPerRow());
                if (mDevice.AutoCirculateTransfer (mConfig.fOutputChannel, outputXferInfo2))
                    goodXfers++;
                else
                    badXfers++;
            }
 
            if (goodXfers == 6) //  Start AutoCirculate playout once 6 fields are buffered on the device...
                mDevice.AutoCirculateStart(mConfig.fOutputChannel);
 
            //  Signal that the frame has been "consumed"...
            mFrameDataRing.EndConsumeNextBuffer();
            continue;   //  Back to top of while loop
        }   //  if CanAcceptMoreOutputFrames
 
        //  Wait for one or more buffers to become available on the device, which should occur at next VBI...
        noRoomWaits++;
        mDevice.WaitForOutputVerticalInterrupt(mConfig.fOutputChannel);
    }   //  loop til quit signaled
 
    //  Stop AutoCirculate...
    mDevice.AutoCirculateStop (mConfig.fOutputChannel);
    BURNNOTE("Thread completed: " << DEC(goodXfers) << " xfers, " << DEC(badXfers) << " failed, "
            << DEC(starves) << " ring starves, " << DEC(noRoomWaits) << " device starves");
}   //  PlayFrames
 
 
 
 
 
//
//  This is where the capture thread gets started
//
void NTV2FieldBurn::StartCaptureThread (void)
{
    //  Create and start the capture thread...
    mCaptureThread.Attach(CaptureThreadStatic, this);
    mCaptureThread.SetPriority(AJA_ThreadPriority_High);
    mCaptureThread.Start();
 
}   //  StartCaptureThread
 
 
//
//  The static capture thread function
//
void NTV2FieldBurn::CaptureThreadStatic (AJAThread * pThread, void * pContext)      //  static
{   (void) pThread;
    //  Grab the NTV2FieldBurn instance pointer from the pContext parameter,
    //  then call its CaptureFrames method...
    NTV2FieldBurn * pApp(reinterpret_cast<NTV2FieldBurn*>(pContext));
    pApp->CaptureFrames();
}   //  CaptureThreadStatic
 
 
//
//  Repeatedly captures frames until told to stop
//
void NTV2FieldBurn::CaptureFrames (void)
{
    AUTOCIRCULATE_TRANSFER  inputXferInfo;  //  F1 transfer info
    AUTOCIRCULATE_TRANSFER  inputXferInfo2; //  F2 transfer info (unused in Field Mode)
    NTV2TCIndexes           F1TCIndexes, F2TCIndexes;
    const ULWord            acOptions ((mConfig.WithTimecode() ? AUTOCIRCULATE_WITH_RP188 : 0)  |  (mConfig.FieldMode() ? AUTOCIRCULATE_WITH_FIELDS : 0));
    ULWord                  goodXfers(0), badXfers(0), ringFulls(0), devWaits(0);
    BURNNOTE("Thread started");
 
    //  Prepare the Timecode Indexes we'll be setting for playout...
    for (size_t ndx(0);  ndx < mTCOutputs.size();  ndx++)
    {   const NTV2Channel sdiSpigot(mTCOutputs.at(ndx));
        F1TCIndexes.insert(::NTV2ChannelToTimecodeIndex(sdiSpigot, /*LTC?*/true));          //  F1 LTC
        F1TCIndexes.insert(::NTV2ChannelToTimecodeIndex(sdiSpigot, /*LTC?*/false));         //  F1 VITC
        F2TCIndexes.insert(::NTV2ChannelToTimecodeIndex(sdiSpigot, /*LTC?*/false, true));   //  F2 VITC
    }
 
    if (!mConfig.FieldMode())
    {
        //  In Frame Mode, use AutoCirculate's "segmented DMA" feature to transfer each field
        //  out of the device's full-frame video buffer as a group of "segments".
        //  Each segment is one line long, and the segments are contiguous in host memory,
        //  but originate on alternating lines in the device's frame buffer...
        inputXferInfo.EnableSegmentedDMAs (mFormatDesc.numLines / 2,        //  Number of segments:     number of lines per field, i.e. half the line count
                                            mFormatDesc.linePitch * 4,      //  Segment size, in bytes: transfer this many bytes per segment (normal line pitch)
                                            mFormatDesc.linePitch * 4,      //  Host bytes per line:    normal line pitch when writing into our half-height buffer
                                            mFormatDesc.linePitch * 8);     //  Device bytes per line:  skip every other line when reading from device memory
 
        //  IMPORTANT:  For segmented DMAs, the video buffer size must contain the number of bytes to
        //              transfer per segment. This will be done just prior to calling AutoCirculateTransfer.
        inputXferInfo2.EnableSegmentedDMAs (mFormatDesc.numLines / 2,       //  Number of segments:     number of lines per field, i.e. half the line count
                                            mFormatDesc.linePitch * 4,      //  Segment size, in bytes: transfer this many bytes per segment (normal line pitch)
                                            mFormatDesc.linePitch * 4,      //  Host bytes per line:    normal line pitch when writing into our half-height buffer
                                            mFormatDesc.linePitch * 8);     //  Device bytes per line:  skip every other line when reading from device memory
        inputXferInfo2.acInVideoDMAOffset   = mFormatDesc.linePitch * 4;    //  Field 2 starts on second line in device buffer
    }
 
    //  Stop AutoCirculate on this channel, just in case some other app left it running...
    mDevice.AutoCirculateStop (mConfig.fInputChannel);
 
    //  Initialize AutoCirculate...
    if (!mDevice.AutoCirculateInitForInput (mConfig.fInputChannel,          //  channel
                                            mConfig.fInputFrames.count(),   //  numFrames (zero if specifying range)
                                            mAudioSystem,                   //  audio system
                                            acOptions,                      //  flags
                                            1,                              //  frameStores to gang
                                            mConfig.fInputFrames.firstFrame(), mConfig.fInputFrames.lastFrame()))
        {BURNFAIL("AutoCirculateInitForInput failed");  mGlobalQuit = true;}
    else
        //  Start AutoCirculate running...
        mDevice.AutoCirculateStart (mConfig.fInputChannel);
 
    while (!mGlobalQuit)
    {
        AUTOCIRCULATE_STATUS acStatus;
        mDevice.AutoCirculateGetStatus (mConfig.fInputChannel, acStatus);
 
        if (acStatus.IsRunning()  &&  acStatus.HasAvailableInputFrame())
        {
            //  At this point, there's at least one fully-formed frame available in the device's frame buffer
            //  memory waiting to be transferred to the host. Reserve an NTV2FrameData to fill ("produce"),
            //  and use it in the next frame transferred from the device...
            NTV2FrameData * pFrameData  (mFrameDataRing.StartProduceNextBuffer ());
            if (!pFrameData)
                {ringFulls++;  continue;}   //  Ring full -- consumer thread isn't consuming frames fast enough
 
            inputXferInfo.SetVideoBuffer (pFrameData->VideoBuffer(),
                                            mConfig.FieldMode() ? pFrameData->VideoBufferSize()
                                                                : mFormatDesc.GetBytesPerRow());
            if (NTV2_IS_VALID_AUDIO_SYSTEM(mAudioSystem))
                inputXferInfo.SetAudioBuffer (pFrameData->AudioBuffer(), NTV2_AUDIOSIZE_MAX);
 
            //  Transfer this Field (Field Mode) or F1 (Frame Mode) from the device into our host buffers...
            if (mDevice.AutoCirculateTransfer (mConfig.fInputChannel, inputXferInfo)) goodXfers++;
            else badXfers++;
 
            //  Remember the amount, in bytes, of captured audio data...
            pFrameData->fNumAudioBytes  = pFrameData->AudioBuffer() ? inputXferInfo.GetCapturedAudioByteCount() : 0;
            if (mConfig.FieldMode())
                pFrameData->fFrameFlags = inputXferInfo.acPeerToPeerFlags;  //  Remember which field this was
 
            //  Get a timecode to use for burn-in...
            NTV2_RP188  thisFrameTC;
            inputXferInfo.GetInputTimeCodes (pFrameData->fTimecodes, mConfig.fInputChannel);
            if (!pFrameData->fTimecodes.empty())
            {
                thisFrameTC = pFrameData->fTimecodes.begin()->second;   //  Use 1st "good" timecode for burn-in
                CAPDBG("Captured TC: " << ::NTV2TCIndexToString(pFrameData->fTimecodes.begin()->first,true) << " " << thisFrameTC);
            }
            else
            {   //  Invent a timecode (based on frame count)...
                const   NTV2FrameRate   ntv2FrameRate   (::GetNTV2FrameRateFromVideoFormat (mVideoFormat));
                const   TimecodeFormat  tcFormat        (CNTV2DemoCommon::NTV2FrameRate2TimecodeFormat(ntv2FrameRate));
                const   CRP188          inventedTC      (inputXferInfo.GetTransferStatus().GetProcessedFrameCount(), 0, 0, 10, tcFormat);
                inventedTC.GetRP188Reg(thisFrameTC);
            }
            CRP188 tc(thisFrameTC);
            string tcStr;
            tc.GetRP188Str(tcStr);
 
            if (!mConfig.FieldMode())
            {   //  Frame Mode: Transfer F2 segments from same device frame buffer used for F1...
                inputXferInfo2.acDesiredFrame = inputXferInfo.acTransferStatus.acTransferFrame;
                inputXferInfo2.SetVideoBuffer (pFrameData->VideoBuffer2(), mFormatDesc.GetBytesPerRow());
                if (mDevice.AutoCirculateTransfer (mConfig.fInputChannel, inputXferInfo2)) goodXfers++;
                else badXfers++;
            }
 
            //  While this NTV2FrameData's buffers are locked, "burn" identical timecode into each field...
            //  F1 goes into top half, F2 into bottom half...
            mTCBurner.BurnTimeCode (ToCharPtr(inputXferInfo.acVideoBuffer.GetHostPointer()), tcStr.c_str(),
                                    !mConfig.FieldMode() || (pFrameData->fFrameFlags & AUTOCIRCULATE_FRAME_FIELD0) ? 10 : 30);
            if (!mConfig.FieldMode())   //  Frame Mode: "burn" F2 timecode
                mTCBurner.BurnTimeCode (ToCharPtr(inputXferInfo2.acVideoBuffer.GetHostPointer()), tcStr.c_str(), 30);
 
            //  Set NTV2FrameData::fTimecodes map for playout...
            for (NTV2TCIndexesConstIter it(F1TCIndexes.begin());  it != F1TCIndexes.end();  ++it)
                pFrameData->fTimecodes[*it] = thisFrameTC;
            for (NTV2TCIndexesConstIter it(F2TCIndexes.begin());  it != F2TCIndexes.end();  ++it)
                pFrameData->fTimecodes[*it] = thisFrameTC;
 
            //  Signal that we're done "producing" the frame, making it available for future "consumption"...
            mFrameDataRing.EndProduceNextBuffer();
        }   //  if A/C running and frame(s) are available for transfer
        else
        {
            //  Either AutoCirculate is not running, or there were no frames available on the device to transfer.
            //  Rather than waste CPU cycles spinning, waiting until a field/frame becomes available, it's far more
            //  efficient to wait for the next input vertical interrupt event to get signaled...
            devWaits++;
            if (mConfig.FieldMode())
                mDevice.WaitForInputVerticalInterrupt(mConfig.fInputChannel);
            else
                mDevice.WaitForInputFieldID (NTV2_FIELD0, mConfig.fInputChannel);
        }
    }   //  loop til quit signaled
 
    //  Stop AutoCirculate...
    mDevice.AutoCirculateStop(mConfig.fInputChannel);
    BURNNOTE("Thread completed: " << DEC(goodXfers) << " xfers, " << DEC(badXfers) << " failed, "
            << DEC(ringFulls) << " ring full(s), " << DEC(devWaits) << " device waits");
 
}   //  CaptureFrames
 
 
 
 
void NTV2FieldBurn::GetStatus (ULWord & outFramesProcessed, ULWord & outCaptureFramesDropped, ULWord & outPlayoutFramesDropped,
                                ULWord & outCaptureBufferLevel, ULWord & outPlayoutBufferLevel)
{
    AUTOCIRCULATE_STATUS    inputStatus,  outputStatus;
 
    mDevice.AutoCirculateGetStatus (mConfig.fInputChannel, inputStatus);
    mDevice.AutoCirculateGetStatus (mConfig.fOutputChannel, outputStatus);
 
    outFramesProcessed      = inputStatus.acFramesProcessed;
    outCaptureFramesDropped = inputStatus.acFramesDropped;
    outPlayoutFramesDropped = outputStatus.acFramesDropped;
    outCaptureBufferLevel   = inputStatus.acBufferLevel;
    outPlayoutBufferLevel   = outputStatus.acBufferLevel;
 
}   //  GetStatus
 
 
static ULWord GetRP188RegisterForInput (const NTV2InputSource inInputSource)
{
    switch (inInputSource)
    {
        case NTV2_INPUTSOURCE_SDI1:     return kRegRP188InOut1DBB;  //  reg 29
        case NTV2_INPUTSOURCE_SDI2:     return kRegRP188InOut2DBB;  //  reg 64
        case NTV2_INPUTSOURCE_SDI3:     return kRegRP188InOut3DBB;  //  reg 268
        case NTV2_INPUTSOURCE_SDI4:     return kRegRP188InOut4DBB;  //  reg 273
        case NTV2_INPUTSOURCE_SDI5:     return kRegRP188InOut5DBB;  //  reg 342
        case NTV2_INPUTSOURCE_SDI6:     return kRegRP188InOut6DBB;  //  reg 418
        case NTV2_INPUTSOURCE_SDI7:     return kRegRP188InOut7DBB;  //  reg 427
        case NTV2_INPUTSOURCE_SDI8:     return kRegRP188InOut8DBB;  //  reg 436
        default:                        return 0;
    }   //  switch on input source
 
}   //  GetRP188RegisterForInput
 
 
bool NTV2FieldBurn::InputSignalHasTimecode (void)
{
    const ULWord    regNum      (::GetRP188RegisterForInput (mConfig.fInputSource));
    ULWord          regValue    (0);
 
    //  Bit 16 of the RP188 DBB register will be set if there is timecode embedded in the input signal...
    if (regNum  &&  mDevice.ReadRegister(regNum, regValue)  &&  regValue & BIT(16))
        return true;
    return false;
 
}   //  InputSignalHasTimecode