ntv2macpublicinterface.h

Go to the documentation of this file.

/* SPDX-License-Identifier: MIT */
#ifndef NTV2MACPUBLICINTERFACE_H
#define NTV2MACPUBLICINTERFACE_H
 
#if !defined (NTV2_BUILDING_DRIVER)
    #include <IOKit/IOKitLib.h>                         //  Defines IOReturn
#endif
 
 
//  Our custom driver IOReturn codes:
const IOReturn  kNTV2DriverBadDMA       = 0x04430011;   // Bad dmaEngine number
const IOReturn  kNTV2DriverDMABusy      = 0x04430012;   // Selected DMA busy or none available
const IOReturn  kNTV2DriverParamErr     = 0x04430013;   // Bad parameter (out of range)
const IOReturn  kNTV2DriverPgmXilinxErr = 0x04430014;   // Xilinx programming error - see system log for details
const IOReturn  kNTV2DriverNotReadyErr  = 0x04430015;   // Xilinx not programmed yet
const IOReturn  kNTV2DriverPrepMemErr   = 0x04430016;   // Error preparing memory (no room),
const IOReturn  kNTV2DriverPgmPPCErr    = 0x04430017;   // PPC programming error - see system log for details
const IOReturn  kNTV2DriverDMATooLarge  = 0x04430018;   // DMA transfer is too large, or completing (dataPtr not found),
                                                        // or attempt to use outside of range
const IOReturn  kNTV2DriverBadHeaderTag = 0x04430019;   //  Bad header tag
const IOReturn  kNTV2UnknownStructType  = 0x0443001A;   //  Unknown struct type
const IOReturn  kNTV2HeaderVersionErr   = 0x0443001B;   //  Bad or unsupported header version
const IOReturn  kNTV2DriverBadTrailerTag= 0x0443001C;   //  Bad trailer tag
const IOReturn  kNTV2DriverMapperErr    = 0x0443001D;   //  Failure while mapping NTV2_POINTERs
const IOReturn  kNTV2DriverUnmapperErr  = 0x0443001E;   //  Failure while unmapping NTV2_POINTERs
const IOReturn  kNTV2DriverMsgConvErr   = 0x0443001F;   //  NTV2Message conversion failure
 
 
// Driver command function codes
typedef enum
{
    kDriverReadRegister                                 = 0,
    kDriverWriteRegister                                = 1,
    kDriverGetDrvrVersion                               = 2,    //  Unsupported starting in 15.0
    kDriverStartDriver                                  = 3,
    kDriverAcquireStreamForApplication                  = 4,
    kDriverReleaseStreamForApplication                  = 5,
    kDriverSetStreamForApplication                      = 6,
    kDriverGetStreamForApplication                      = 7,
    kDriverLockFormat                                   = 8,
    kDriverSetAVSyncPattern                             = 9,    //  Unsupported starting in 15.2
    kDriverTriggerAVSync                                = 10,   //  Unsupported starting in 15.2
    kDriverWaitForInterrupt                             = 11,
    kDriverGetInterruptCount                            = 12,
    kDriverWaitForChangeEvent                           = 13,
    kDriverGetTime                                      = 14,
    kDriverDMATransfer                                  = 15,
    kDriverRestoreProcAmpRegisters                      = 16,
    kDriverSetBitFileInformation                        = 17,   //  Unsupported starting in 12.4
    kDriverGetBitFileInformation                        = 18,   //  Unsupported starting in 12.4
    kDriverSetDebugFilterStrings                        = 19,
    kDriverGetDebugFilterStrings                        = 20,
    kDriverAutoCirculateControl                         = 21,
    kDriverAutoCirculateStatus                          = 22,
    kDriverAutoCirculateTransfer                        = 23,
    kDriverAutoCirculateFramestamp                      = 24,
    kDriverSetDefaultDeviceForPID                       = 25,   //  Unsupported when classic QuickTime dropped after SDK 14
    kDriverIsDefaultDeviceForPID                        = 26,   //  Unsupported when classic QuickTime dropped after SDK 14
    kDriverSystemControl                                = 27,
    kDriverSystemStatus                                 = 28,
    kDriverDMATransferEx                                = 29,
    kDriverAcquireStreamForApplicationWithReference     = 30,
    kDriverReleaseStreamForApplicationWithReference     = 31,
    kDriverKernelLog                                    = 32,
    kDriverReadAudioBuffer                              = 33,   //  Unsupported starting in 15.2
    kDriverNTV2Message                                  = 34,   //  Added in 12.0 -- all new driver functionality goes thru this NTV2Message call
    kDriverWaitForInterruptDQ                           = 35,   //  Added in 17.1
    kNumberUserClientCommands   // number of driver commands
} UserClientCommandCodes;
 
 
// Memory types for IOConnectMapMemory
 
typedef enum
{
    kRegisterMemory,
    kFrameBufferMemory,
    kXena2FlashMemory,
 
    kNumberMemoryType   // number of Memory types
} MemoryType;
 
typedef enum
{
    kInterruptOutputVertical= 1,
    kInterruptInput1Vertical,
    kInterruptInput2Vertical,
    kInterruptAudio,
    kInterruptAudioOutWrap,
    kInterruptAudioInWrap,
 
    kInterruptDMA1,
    kInterruptDMA2,
    kInterruptDMA3,
    kInterruptDMA4
} InterruptType;
 
typedef enum
{
    kDMANone =  0,      // Use PIO
    kDMA1 =     1,
    kDMA2 =     2,
    kDMA3 =     3,
    kDMA4 =     4,
    kDMAAuto =  99      // Auto DMA selection
} DMAEngine;
 
 
// Virtual registers
#include "ntv2virtualregisters.h"
 
#define AUDIO_MAX_SAMPLING_RATE_PER_MS 48
 
// Some IoHD specific registers
enum
{
    // isoch global
    kRegIoHDGlobalStatus        = 2048,
    kRegIoHDGlobalControl       = 2049,
    kRegLocalRegBaseAddrHi      = 2050,             // our local base register used for delivery of interrupts
    kRegLocalRegBaseAddrLo      = 2051,             // our local base register used for delivery of interrupts
 
    // ischo ch1 video
    kRegIsochVideoCh1Status     = 2052,
    kRegIsochVideoCh1Control    = 2053,
    kRegIsochVideoCh1Packets    = 2054,
 
    // isoch ch1 audio
    kRegIsochAudioCh1Status     = 2056,             // hardwired to be the audio playback channel
    kRegIsochAudioCh1Control    = 2057,
    kRegIsochAudioCh1Packets    = 2058,
 
    // isoch ch2 audio
    kRegIsochAudioCh2Status     = 2060,             // hardwired to be the audio capture channel
    kRegIsochAudioCh2Control    = 2061,
    kRegIsochAudioCh2Packets    = 2062,
 
    // misc
    kRegFireWireErrors          = 2064,             // Read - crc errors [0:15], runt packets [16:31]
    kRegAudioBufferSize         = 2065,             // audio buffer size
    kRegAudioPlaybackControl    = 2066,             // audio playuback control
 
    // AV bitfile select
    kRegAVBitFileCSR            = 2068,             // AV bitfile control and status - currently loaded AV bitfile (read / write)
    kRegBitFileBusy             = 2069,             // Set true when busy during bitfile loading (read only)
    kRegGetBitFileInfoSelect    = 2070,             // which bitfile we want info (write only)
    kRegUserState1              = 2071,             // contains user state info (Primary/Secondary format, Input select)
 
    kRegVideoDelay              = 2072,             // video delay register
 
    // firmware updates
    kRegUpdateControl           = 2112,             // Update control register
    //kRegUpdateSoftwareVersion = 2113,             // Software version
    //kRegUpdateProductVersion  = 2114,             // Product version
    kRegUpdateBitFileCommand    = 2115,             // Which bitfile will be updated (write only)
    kRegUpdateCRC               = 2116,             // CRC register
    kRegUpdateStatus            = 2117,             // Status register
    kRegSerialNumber            = 2118,             // Serial register 2 quadlet, 8 bytes
    kRegUpdateData              = 2120,             // data 128(0x80) quadlets, or 512(0x200) bytes, thru 0x8d0
 
    // NOTE: THIS VALUE HAS TO MATCH WHAT IS RETURNED BY NTV2DeviceGetMaxRegisterNumber
    kRegIoHDLast                = 2624
};
 
 
// isoch streams (channels)
enum IsochStreamType
{
    kIsochVideoStream           = 0,
    kIsochAudioPlaybackStream   = 1,
    kIsochAudioCaptureStream    = 2,
    kIsochMaxStreams            = 3
};
 
// update register values
enum
{
    //kMaskStandBusyStatus
    kStandAloneNormalStatus     = 0,
    kStandAloneBusyStatus       = 1,
 
    // kMaskStandAloneMode
    kStandAloneNoOp             = 0,
    kStandAloneFactoryBurn      = 1,
    kStandAloneUserBurn         = 2,
    kStandAlonePatternBurn      = 4
};
 
#endif  //  NTV2MACPUBLICINTERFACE_H